Guide To Choosing The Best Heating System For Your Home

If lately, your days have gone by looking for “furnace companies near me” or “Which is the safest heating system, the least polluting one, the one that provides a healthy, enveloping heat and at the same time allows us to save energy at home? The best way not to waste is to install the hot water floor heating system, but its installation is expensive and quite problematic for a house where you are living.

That’s why the most appropriate options today are electric radiant floor, electric radiators, electric or gas stoves. Technically, it is preferable to use gas than electricity to generate heat energy. If you do not have a radiant floor installation or water radiators, the balanced draft is undoubtedly more recommendable than any electric heating type, both economically and efficiently.

Balanced draught stoves

They are still a good option for home heating. They have a double communication, take oxygen from the outside, and discard the combustion outside to be installed in all types of environments, even in bathrooms and bedrooms. They provide an enveloping heat that does not cause headaches or a feeling of lack of air, although they can dry out the mucous membranes a little, especially if they are at maximum power.

That is why it is always advisable to regulate them. For a 6 x 5 meter room, you need a stove of between 3000 and 4500 calories approximately. It is necessary to revise to check that their security devices work and to carry out the cleaning of burners once a year at the beginning of the winter, always by a registered gas dealer.

Electrical systems

You have to be aware of the consumer because they considerably increase the amount to be paid in the electricity bill. For example, if you choose a hot/cold air conditioner, you should make sure that it is labeled class A because it consumes less energy than a B or C. They are among the most efficient electrical options since they have a thermostat that measures the room temperature, and once it is reached, they stop heating.

Other alternatives are electrical panels, which heat by Joule effect and then radiate 85% of their heat; it is a cement and cellulose plate with an electrical resistance inside and works by convection and infrared heat. Among the main advantages it has is that it is a clean heating system that does not produce odors, or generate waste because there is no combustion, do not use liquids, oils, or gases, and do not consume oxygen. Its installation is simple, just having an electrical outlet and can be placed in any house. It is necessary to pay attention to choose the indicated model according to each environment. For example, for about 38 m2, we recommend using one of 450 Watts. The disadvantage for both the air conditioning and the electrical panels is that, in addition to the higher energy consumption, they need to be complemented with another type of heating in the case of frigid climates.

Solar heating

It is the system that pollutes the least, the safest, and the one that saves the most energy. The two types of solar heating used are radiant floor heating and water-based radiators. It is still more efficient when working with radiant floor heating because it gives a more uniform and enveloping heat.

Depending on the geographical location because of sunshine, the most efficient alternative is a hybrid system between solar energy (solar water heaters) and a radiant floor system. On sunny days (even if the temperature is down to -35°C), the system heats the water and delivers it to the gas boiler. When it detects that the water is already hot, the boiler does not turn on its burner, and thus the most excellent efficiency and savings are achieved. Solar collectors are placed on the roof of a house and are also suitable for buildings.

As you can see, there are several options available to you, so the best way to find a heating system that suits your needs is to discuss it with furnace companies near me.