How To Build a Sliding Barn Door Entertainment Center For Your Man Cave

  • 4 – 2×3 @ 84″
  • 4 – 2×3 @ 17″
  • 4 – 2×3 @ 14″

Sides

  • two – 3/4″ thick plywood slice 36″ x seventeen-1/4″

Face Body

  • five – 1×4 @ 36″
  • eight – 1×4 @ seventeen-3/4″

Shelves

  • two – 1×8 @ 87″
  • two – 1×10 @ 87″

Center Shelf Supports and Cleats

  • five – 1×2 @ 14″
  • five – 1×2 @ 17″

Base Trim

  • 1 – 2×3 @ 90″
  • two – 2×3 @ eighteen-3/4″

Top rated

Doorways

  • two- 1/4″ thick plywood slice 20″ x 30″
  • 4- 1×3 @ 30″
  • two- 1×3 @ 15″
  • 1- 1×3 @ 29 1/4″ from corner to corner slice at an angle of 28 degrees

How To Construct A Sliding Barn Door Leisure Centre:  The Process

Move 1)  Build The Body

Man Cave Idea: Sliding barn door entertainment center from Diva of DIY on Remodelaholic

The frames are rather self-explanatory but I have incorporated a finished photograph as well as a in depth diagram.  I made 3 individual consoles so that is why you see  6 of these frames.

How To Build A Sliding Barn Door Console For Your Man Cave by Diva of DIY on Remodelaholic

Move two)  Add The Sides

Build A Sliding Barn Door Entertainment Center For Your Man Cave from Diva of DIY on Remodelaholic

Attach the 3/4″ plywood by initially applying a bead of wood glue all over the edge of the plywood and secure employing two 1/2″ screws.  Repeat with every part.

Move 3)  Attach to the wall.

DIY Man Cave Ideas: Barn Door entertainment console to store all the TV equipment by Diva of DIY on Remodelaholic.

I apologize but I forgot to choose a photograph of the frame put in ahead of deal with frame, cabinets and cleats were put in but I have incorporated a diagram beneath to give you the measurements.

I put in tongue and groove car or truck-siding for texture which demonstrates by means of the open back again side.  Another excellent notion would be to paint a contrasting paint colour or add a enjoyment wallpaper on the wall behind the console.

Move 4)  Add The Face Body

How to build a barn door entertainment center by Diva of DIY on Remodelaholic

Move five)  Add cleats and cabinets

Sliding Barn Door Cleats for farmhouse entertainment center build by Diva of DIY on Remodelaholic.

Move 6)  Add top boards.

Don’t connect at this issue due to the fact it will make it additional complicated to paint or stain them.

Move seven)  Stain or paint frame and top

Body and doors:  Sherwin Williams SW Iron Ore (identical colour that Cassity made use of in this article!)

Top rated (Pine):  Custom Minwax stain colour blend of  50/fifty Vintage Gray/Jacobean

Move eight)  Make Doorways

You could also make standard shaker cupboard doors adhering to this tutorial in this article. 

How To Build A Sliding Barn Door Console by Diva of DIY on Remodelaholic

 

Build a farmhouse entertainment center by Diva of DIY on Remodelaholic

Rip plywood to 20″ x 30″ panels (or size of opening).  With nail gun, connect the two 30″ trim boards to the plywood panel.

Plans for DIY sliding barn door entertainment center from Diva of DIY on Remodelaholic

Double test your measurement and slice the remaining trim boards to finish the doorway panel.  Attach with nail gun.

How to build a farmhouse entertainment center by Diva of DIY on Remodelaholic

To create the diagonal structure shown on my enjoyment centre, your board will be 29 1/4″ extensive from corner to corner with an angle of 28 degrees.  Again, connect with nail gun.

How To Build A Sliding Barn Door Console For Your Man Cave by Diva of DIY on Remodelaholic

Stain or paint doors (or both of those!).  I painted mine Sherwin Williams Iron Ore to match the frame. (This is the identical colour Cassity painted her inside doors and colorwashed her barn doorway in this article to add colour while continue to exhibiting the wood grain.)

Move 9)  Hang Doorways

How To Build A Sliding Barn Door entertainment console For Your Man Cave by DIva of DIY on Remodelaholic

I adopted the recommendations incorporated with my sliding doorway components. See our Remodelaholic picks for finances-helpful sliding doorway components in this article.

Move ten)  Attach top boards to the frame

How To Build A Sliding Barn Door Console For Your Man Cave by Diva of DIY on Remodelaholic

That is it!  Not much too poor for an whole sliding barn doorway enjoyment centre, suitable?  Now it is time for the enjoyment part…the components.

How To Build A Sliding Barn Door Console For Your Man Cave 21

I chose chunky baskets, old trunks and metal containers to decorate our guy cave opening shelving.  They add added storage while keeping a masculine experience.

 

How To Build A Sliding Barn Door Console For An Entertainment Center Or Media Room | Farmhouse style | DIY barn doors

I am so satisfied with the way my sliding barn doorway enjoyment centre turned out.  All of the activity systems and cable bins are hidden guiding the barn doors when not in use, but the doors effortlessly slide open to give accessibility when wanted.  The added storage is fantastic for all of the PS4/XBox games and our DVDs and I even have a basket for remote controls. Life is very good for all of us!

Each and every and every single a person of you encourage me and I Love to see the do the job that you’ve developed. Experience free to share with me on Instagram, Twitter or Facebook. And as constantly, be confident to abide by Diva Of Diy on Pinterest and signal up for our No cost Publication to acquire the latest jobs sent straight to your inbox!  – Leanne


And abide by alongside with Remodelaholic, much too, on YouTube, Instagram, Facebook, and Pinterest.

Much more from Remodelaholic:

Diy and finances-helpful sliding barn doorway components

how to develop a farmhouse console

how to develop a double X console desk

how to effortlessly and inexpensively stain wood any colour

how to develop a break up Dutch barn doorway

Originally posted 08.26.2017 // Current 03.25.2020